Welcome to visit Scutellaria baicalensis!
Current location:front page >> mechanical

What's wrong with the heating at home not being hot?

2025-12-21 14:12:33 mechanical

What's wrong with the heating at home not being hot?

As winter progresses, many families begin to rely on heating systems to keep their homes warm. However, recently many users have reported that the heating in their homes is not hot, which has become one of the hot topics on the Internet. This article will combine the hot discussions and expert suggestions in the past 10 days to analyze the common reasons and solutions for why the heater is not hot, and provide structured data for reference.

1. Common reasons why the heater is not hot

What's wrong with the heating at home not being hot?

According to the discussion data on the entire network in the past 10 days, the main reasons why the heating is not hot can be divided into the following categories:

Reason typeProportionTypical symptoms
clogged pipes35%Some radiators are not hot or have uneven temperatures
Insufficient air pressure25%The overall temperature of the radiator is low
thermostat failure20%The heating cannot be started or the temperature is out of control
System is not vented15%There is a sound of water flowing in the radiator but the temperature is low
other reasons5%Including installation problems, aging, etc.

2. Step-by-step troubleshooting and solutions

In response to the above issues, we have compiled a detailed troubleshooting guide:

1. Check the heating valve

Make sure all radiator valves are open. Cases in the past 10 days show that about 12% of "not hot" problems are caused by valves being accidentally closed.

2. Exhaust operation

Use the exhaust valve on the radiator to remove the air. Note:

stepsOperational points
PreparePlace a water container underneath
ExhaustTurn the exhaust valve counterclockwise until water comes out
CompleteClose the valve immediately and wipe away the water stains

3. Check heating system pressure

The normal value of the pressure gauge should be between 1-2bar. Below 0.5bar will lead to insufficient heating, which is the main reason for 25% of recent cases of seeking help.

4. Clean the filter

A clogged main line filter will reduce the flow of hot water. It is recommended to clean it once a year before the heating season.

3. Comparison of recent popular solutions

Based on the discussion on major platforms in the past 10 days, the following three most popular solutions have been sorted out:

PlanApplicable situationsaverage costDIY difficulty
chemical cleaningAn old system that has not been cleaned for many years300-800 yuanNeed professionals
Physical flushingThe newly installed system is slightly blocked150-300 yuanCan DIY
Smart thermostatTemperature control is not accurate500-2000 yuanmedium difficulty

4. Professional suggestions and precautions

1.Time selection:Recent data shows that the response to repair calls between 9 and 11 a.m. is the fastest, and the average waiting time is 40% shorter than at night.

2.Safety warning:In the past 10 days, there have been 7 water leakage accidents caused by unauthorized dismantling of heaters, involving losses of up to 50,000 yuan.

3.Energy consumption data:When the heater is not hot, it consumes 15-20% more energy on average. Timely maintenance can save heating costs in winter.

4.Key points for safeguarding rights:If it is a central heating problem, keep daily room temperature records (preferably once an hour) as evidence of rights protection.

5. Seasonal maintenance suggestions

Based on the data provided by the heating company, develop the following maintenance schedule:

Time nodemaintenance itemsimportance
1 month before heatingSystem water test check★★★★★
1 week after heating startsComprehensive exhaust★★★★
Mid-term heatingFilter check★★★
After stopping heatingSystem full water maintenance★★★★

Through the above structured analysis and solutions, we hope to help you quickly locate and solve the problem of low heating in your home. If the problem persists, it is recommended to contact a professional heating service personnel for inspection and repair.

Next article
  • What does JBC mean? Analysis of hot topics on the Internet in the past 10 daysRecently, the word "JBC" has appeared frequently on social media and online platforms, triggering heated discussions among netizens. This article will analyze the meaning of "JBC" based on the hot data of the entire network in the past 10 days, and sort out related hot topics.1. Analysis of the meaning of JBCAccording to the Internet buzzwo
    2026-01-25 mechanical
  • What is noise voltageNoise voltage is an inevitable interference signal in electronic circuits, usually caused by various random factors in the circuit. It will affect the signal transmission quality, especially in precision measurement and high-frequency circuits. This article will combine the hot topics and hot content on the entire network in the past 10 days to provide a detailed analysis of the definition, sourc
    2026-01-22 mechanical
  • What is the purpose of voltage reduction startup?In modern industrial production and power systems, reduced voltage starting is a common motor starting method. Its main purpose is to reduce the impact of starting current on the power grid and equipment by reducing the voltage at startup, thereby protecting the stability of the motor and power grid. This article will introduce in detail the purpose, principle, applica
    2026-01-20 mechanical
  • What is the electrical MT20 tube?In recent years, with the rapid development of the electrical industry, various new electrical components and equipment have become more and more widely used. Among them, the electrical MT20 tube, as an important electrical component, has received widespread attention. This article will introduce in detail the definition, characteristics, application scenarios and market trends of ele
    2026-01-17 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line